Warehouse Racking

Warehouse Racking/ Shelving System:

Warehouse Racking/ Shelving System is also refer to as Warehouse Shelving. It is basically a storage system design to stack materials in horizontal rows with multiple levels. With proper Warehouse Racking, warehouse managers maximize space and optimize Warehouse Racking organization for efficiency and a streamlined picking process.  Warehouse layout plays a major role in Warehouse Racking/shelving System, as aisle width, docking locations, shipping areas, and other warehouse components affect warehouse racking/shelving options. Pallet racking is the most common form of Warehouse Racking/shelving systems.

Bari-Engineering-Pallet-Rack

Components of Warehouse Racking/shelving system

Load beams, also called step beams are support structures that allow for materials to be stored in a horizontal form. The load beams are fit onto the upright framework that enables for the Warehouse Racking/shelving system.

Upright frames are a Warehouse Racking framework that is design to fit into the warehouse design. The upright frames are columns that stand upright and go as high as possible to increase on the capacity of the warehouse. Holes are then drill into these upright columns at regular intervals so as to mount the load beams.

Diagonal braces are weld or bolt between two upright columns to increase on rigidity and strength. They are also refer to as the horizontal braces or the upright frame lacing.

Wire decking is use to increase safety while storing materials in Warehouse Racking. The wire decking is usually a wire-mesh that is fit to the horizontal columns to prevent the store materials from falling from the rack structure. The mesh is used as oppose to a solid base so that dirt does not accumulate at the shelves. The mesh is also use to easy the identification of the specific materials store in each shelve. This is because with the mesh, you can see through even to highly place shelves and know which materials are store at any location.

Foot plated, also known as the face plates are usually placed at the base of the columns to increase on the stability of the column. These anchor are bolted in to firmly support the columns to the concrete floor.

Warehouse Racking/ Shelving System  Advantages

  • One big advantage of Warehouse Racking is that it helps to save space. The layout in which the racks are build allows to utilizing wasted vertical space.
  • Warehouse racking system is reliable. It allows you to store your material for the large period of time.
  • It’s much cheaper to employ a racking system than double the square footage of an existing warehouse.
  • Adding a racking system can double and sometimes even triple the amount of materials you’re able to handle in your warehouse.
  • Direct access to each pallet
  • Simple stock management
  • Adaptable to any product volume, weight or size

Types of Warehouse Racking System

  • Selective Racks:

The most commonly used pallet system, selective racks provide access from an aisle. These Warehouse Racking systems are ideal for narrow aisle racking, standard systems, and deep-reach systems. Selective racks require special narrow lift trucks and accommodate a single pallet in depth.

 

  • Drive-In and Drive-Through Racks:

For high-density storage, drive-in and drive-through racks are ideal. Constructed of steel in most cases, these Warehouse Racking systems have enough space for a forklift to move into its bay. It’s important to note that drive-in racks have one entrance and exit, but drive-through racks allow access on both sides of the bay. As a result, drive-in racks are suit to the last in, first out (LIFO) process commonly use for nonperishable products or those with a low turnover. On the other hand, a drive-through system requires a first in, first out (FIFO) process. Drive-in and drive-through racks may be floor-to-ceiling structures.

 

  • Push Back Racking/shelving Systems:

Typically used for bulk storage, push back racking systems store products that span 2-5 pallets. When a pallet is load onto the system, it pushes the next pallet back, and when a pallet is unload, it is push to the front of the system. Push-back racking systems utilize the LIFO system and often feature inclined rails and sliding carts and double lanes.

  • Flow Rack:

Also known as gravity racks, flow racks are commonly used for high-density storage. With this type of warehouse racking/shelving system, items are load at the higher end and remove at the lower end using a FIFO system. The rotation of products becomes automatic as the racks flow with loading and unloading. Flow racks make use of gravity rollers that move in conjunction with the rack load and feature brakes or speed controllers to regulate item movement. One advantage of flow racks is they do not require electricity for operation because gravity powers them.

 

Bari-Steel-Rack-Warehouse-Racking-2.jpg

Bari-Steel-Rack-Warehouse-Racking-4.jpg

                                      

Put here little detail about your inquiry, like required item and load capacity.
Back To Top